Walrus Oil 32 oz. Cutting Board Oil
Walrus Oil is a food-safe wood finish made up of Coconut Oil, Mineral Oil, Vitamin E, and Beeswax, FDA compliant for food contact surfaces such as cutting boards and butcher blocks.
We recommend sanding the surface with a fine or very fine grit, 220 to 600. To prevent grain fibers from rising after use, before applying Walrus Oil some will sand the board, wet it, dry it off, then sand it again.
Apply an even layer of Walrus Oil on all sides of the board. Prop the board up on something so that all sides can air dry at the same time. Dry for at least 12 hours and no more than 48 hours.
After drying buff away excess oil with a soft rag and work in any wax residue. You’re done! Although not necessary, for extra depth and color you may apply a 2nd coat.